1. The air pump needs to be connected to the car cigar lighter to get power supply |
2. Connect one end of the air tube to the air pump, screwing the other end of the air tube to Tyre valve cores of the car. |
3. As for the French Tyre valve cores, you need to add the switched air cock |
4. Firstly press the ON/OFF button, then inflate the Tyre |
5. The +/- button is the preset button of pressure, short press can slowly adjust andlong press can quickly adjust. |
6. Set the suitable pressure value(Bicycle is 50PSI, Car is 30PSI), it will automatically finish setting after the pressure value flashes for 4 seconds, then press the Power button |
7. The intelligent type air pump will automatically stop to inflate the Tyre when air pressure reaches the setting pressure value, you need to press the Power Switch to turn off the LED lamp |
8. After finishing inflating, take the air tube down from the Tyre valve cores quickly, and take the other end of the air tube down from the mainframe, then insert it into the reserving slot, and place the air pump in the dry and safe place. |
Your page text goes here